The quality of the diesel filter is critical
If you want the truck to start smoothly, it is extremely important to choose the quality of the diesel filter. Nowadays, the production technology of truck engines is getting better and better, and the quality of oil products required by diesel engines is getting higher and higher. It is inevitable that some diesel engine drivers feel depressed. Because of the problems in the quality of the oil, it is necessary to pay attention to the operation of the diesel filter at all times, and to reduce the fuel quality, it will have some impact on the engine of the vehicle.
The truck diesel strainer is mainly used to filter out some coarse solid particles in the diesel oil. It is usually installed on the engine or on the girders of the truck. Diesel fine filters are mainly used to filter those fine solid particles and impurities, so that more high-quality diesel can be obtained. Its installation position is generally near the engine oil pump.
If there are impurities and particles infiltrating into the fuel supply system of the truck, the fuel components are more likely to be damaged, and the main component that can better prevent these potential hazards is the diesel filter.
The structure of the truck diesel filter is similar to that of the oil filter. But in fact, the diesel engine is subjected to lower operating pressure and oil temperature than the oil filter. The oil is the main lubricant of the engine, and the temperature it needs to withstand is several hundred degrees Celsius. Therefore, the high temperature resistance required for the oil filter is also important.
The diesel filter can only guarantee a relatively smooth fuel supply in the natural environment temperature, but the required filtering effect is higher than the medicinal oil filter. This is mainly because the truck engine fuel injection. The accuracy required by the system can reach the fuel injection pressure of 2000 bar, so that the fuel can be fully atomized, because as long as there is such a small amount of impurities, the blockage of the truck injection system will be formed, and serious conditions will also result. The ejector has a scrapped condition.
Because China’s diesel has a high sulfur content, it is easier to produce sulfuric acid after it reacts with water in the process of combustion. This will rust the parts of the diesel engine, and the main use of the oil-water separator of the truck. Performance, which is used to separate moisture from diesel. The truck oil-water separator is mainly installed under the coarse filter, which looks like a transparent filter cup. Its principle of use is to remove moisture and impurities from the principle of gravity sinking based on the density difference between fuel and water.
Our company has the filter, has always been based on quality, and constantly put forward higher requirements for the application of the product, so that the product can meet the filtration accuracy requirements of various conditions under various conditions.
The measure of the quality of the filter is not only the life of the filter, but more importantly the filtration efficiency of the filter.
High-quality filters should have high filtration efficiency and long service life, so our company fully considers the filter performance indicators when designing the filter.
Post time: Oct-11-2019